Premium Essay

Yankee Manufacturing

In: Business and Management

Submitted By ksavage
Words 808
Pages 4
Situation A: In evaluating the internal control over cash payments of Yankee Manufacturing, an auditor learns that the purchasing agent is responsible for purchasing diamonds for use in the company’s manufacturing process, approving the invoices for payment, and signing the checks. No supervisor reviews the purchasing agent’s work. The missing internal control characteristic for the Yankee Manufacturing company is separation of duties. There are many things that can happen to this business since there is only one person who is the purchaser of the diamonds, approving the invoices, and signing the checks. Also, there is no supervisor checking over this employee’s work. The problem with having one person doing many jobs within Yankee Manufacturing is that fraud could take place or the diamonds could be stolen. When there is only the one employee who purchases the diamonds, approves invoices for payment, and signs the checks, that same employee could take the diamonds without anyone knowing because no one is checking his work. This employee could have diamonds taken to a certain location and the supervisors may not even know before it is too late. A way to keep theft and fraud from happening is to have three different employees doing the duties that the one employee is doing now. For example, there should be one person who is the sole person for purchasing the diamonds. There should be a second person who is in charge of approving invoices for payments. Lastly, there should also be a separate person from the others who signs the checks. This strategy will help keep Yankee Manufacturing in business and they will have less risk of fraud and theft.
Situation B: Rachel Williams owns an architectural firm. Williams’ staff consists of 19 professional architects, and Williams manages the office. Often, Williams’ work requires her to travel to meet with clients.…...

Similar Documents

Premium Essay

Manufacturing

...Manufacturing: A brief global look by ??? April 9, 2011 Manufacturing is a key component of any country’s economy and many comparisons have been made between the United States (U.S.) and other countries. Since World War II the U.S. has been the leader of the manufacturing sector due mainly to the fact that the U.S. industrial plants were not devastated by the destruction of war as where most of Europe and Asia. This paper is a team effort and will give a brief look at the state of manufacturing and some of the incentives each government has used to entice the growth of manufacturing within their respective countries. The countries to be examined are the United States, China, Germany and Japan. You hear it on the news, read it in the newspapers and see the results in the stores that manufacturing is dead in the (U.S.); however, if you do a little research you find the U.S. is still the leader in manufacturing production. As Stephen Manning of the Associated Press acknowledged in a rare “just the facts” story in mid-February, the U.S. “by far remains the world’s leading manufacturer,” producing goods valued at a record $1.6 trillion in 2007 — nearly double the $811 billion produced a decade earlier. Indeed, the AP writer noted, “For every $1 of value produced in China’s factories [in 2007], America generated $2.50.” Not bad for a country that doesn’t produce anything anymore. Some other facts about U.S. manufacturing are: •The United States is the world’s...

Words: 4474 - Pages: 18

Free Essay

Visual Argument: Yankee Stadium

...The New Yankee Stadium: A Visual Analysis When walking into Gate 4 of the new Yankee Stadium, a true fan of the blue and white pin strips experiences déjà vu. When building the new stadium the architects designed the new Gate 4 to mirror the Gate 4 of the old stadium right next door. When the initial design plans began, the organization had to think about not only the history of the team, but also how the die-hard fans would react when first walk into the stadium. Including mirroring the old stadium, the outside walls of the new stadium closely resembled the old stadium as well. When you first step into the new facility every idea that you had about what it was going to be like was destroyed except for the field itself. There is a much heavier emphasis on taking a more modern approach when they thought about the design. Everything from food vendors, to team stores, to even the bathrooms were brought from the 20th to the 21st century. Though there are some drastic differences, some aspects of the stadium did stay more along the lines of the original stadium. The seating is generally the same with regard to layout. But the major difference between old and new is the price of a seat. An even more outrageous price is how much it cost to build this monstrosity of a stadium. The average cost to build a stadium is about eight hundred million dollars; the new Yankee Stadium cost 1.5 million dollars to erect. The field has essentially the same look, but the dimensions were changed......

Words: 1439 - Pages: 6

Premium Essay

Yankee Fork and Hoe

...Forecasting is a critical component of balancing supply in order to meet customer needs while ensuring costs are kept low. Without proper forecasting, companies can see a direct hit to their bottom line by keeping too much inventory resulting in capacity issues, as well as by losing customers due to not having enough inventory. In the case of Yankee Fork and Hoe Company there are several issues with the forecasting system used in each department and these issues need to be rectified in order to improve cross-functionality and customer service for the company. The Marketing Department When Sharon Place is tasked with figuring out the issues in forecasting within the company, one of the people she sees is Ron Adams, the marketing manager. Adams explains that he meets with several managers from each sales region and goes over the shipping data from the prior year as well as upcoming promotions, economic conditions, and shortages from the prior year. He then creates a monthly forecast for the following year. This process is clearly not working, and since the production department relies heavily on the forecasting from marketing, adjustments must be made. Recommendation: Adams needs to find a quantitative method to create a forecast as opposed to the qualitative one he is currently using. He is also using the shipping data to make his suggestions as opposed the actual demand data. This is a problem since the company has had issues meeting the demand, therefore relying on the......

Words: 1127 - Pages: 5

Premium Essay

Manufacturing

...MANUFACTURING Manufacturing is the production of merchandise for use or sale using labor and machines, tools, chemical and biological processing, or formulation. The term may refer to a range of human activity, from handicraft to high tech, but is most commonly applied to industrial production, in which raw materials are transformed into finished goods on a large scale. Such finished goods may be used for manufacturing other, more complex products, such as aircraft, household appliances or automobiles, or sold to wholesalers, who in turn sell them to retailers, who then sell them to end users – the "consumers". FACTS ABOUT MANUFACTURING IN THE PHILIPPINES: * Manufacturing accounts for nearly 24% of the Philippines' total GDP, while manufactured goods comprise 90% of Philippine exports, including furniture and fixtures, transport equipment, petroleum products, miscellaneous manufactures, electrical machinery, leather products, beverages, paper and paper products, basic metal, fabricated metal products, non-metallic mineral products, rubber and plastic products, textiles, and many more. * The Philippines is now considered one of the most competitive areas for manufacturing. After the unfortunate events in Japan, flooding in Thailand, the rising costs of countries such as Vietnam and China, the Philippines now is in position to lead manufacturing growth in the Asia. * The bulk of the Philippine manufacturing industry is concentrated in Manila, the capital.......

Words: 1924 - Pages: 8

Premium Essay

Yankee Case

...1. The problem with the forecasting system used by Yankee is split in two. There is no communication between production and marketing and therefore they are creating their own forecasting demands. Marketing meets only once a year to determine demand for the whole year. It looks like marketing creates its forecast using shipping data and not actual demand data. This could be the reason they are coming up short toward the end of the year. They are using past shipping information that isn’t reflecting actual demand but can be reflecting the shipping shortages of last year. This will cause the past problems to bleed into the future forecast. Then production gets the marketing demand numbers and drops the demand by 10% because they believe marketing has inflated the numbers. Then they come up short with the production and there’s never enough time for the forgers of steel to work to catch up. To solve this issue, they need to work together to create one, actual demand based; forecast that the whole company can agree on. They cannot work separately on the forecast because this is definitely causing shortages and inventory problems. 2. It can be seen that there is a seasonal effect on the demand for the bow rakes, therefore to create a forecast for year five I used the multiplicative seasonal method. There is also an upward trend annually in the demand for the rakes. Using the Multiplicative seasonal method takes both the seasonal and upward trend into account when creating a......

Words: 283 - Pages: 2

Premium Essay

Morgan Manufacturing

...Case 6-3 Report Charles Crutchfield, manager of manufacturing operations at Morgan Manufacturing, was concerned with the health of the operating aspects of the business. And Westwood, Inc. was Morgan Manufacturing’s major competitor. According to the financial statements, Edward Drewery, controller of Morgan Manufacturing, stated the reason why their operations were less efficient than Westwood’s might be their different method to account for inventory. Over 2006, Morgan Manufacturing implemented significant productivity improvements over Westwood. But these improvements were not reflected in the financial statements (Exhibit 1). Morgan Manufacturing used LIFO as its inventory costing method, while Westwood used FIFO. Additionally, comparison of three key ratios indicated relative differences between these two competitors: gross margin percentage, pre-tax return on sales, and pre-tax return on assets. And calculations of these three ratios are below: Ratio | Calculation | Gross margin percentage | Gross margin/ Sales | Pre-tax return on sales | Income before tax/Sales | Pre-tax return on assets | Income before tax/ Total assets | Based on the two different methods they used to account for inventory, here is the 2006 comparison of the three ratios between Morgan Manufacturing and Westwood: Ratio | Morgan Manufacturing | Westwood, Inc. | Difference | Gross margin percentage | 44.5% | 45% | -0.5% | Pre-tax return on sales | 14.5% | 15% |......

Words: 664 - Pages: 3

Free Essay

Manufacturing

...ME 303 MANUFACTURING ENGINEERING PROBLEM SETS Prepared by: Kamil Özden Ural Uluer Salih Alan Mehmet Bilal Atar PROBLEM SET FOR CHAPTER 2 Q2.1 A copper bar is to be cold rolled into a section which must have a min. tensile strength of 390 MPa. If the final cross-sectional area is 20.13 mm2 and assuming the flow properties of the workpiece material are given as K = 450 MPa, n = 0.33. Calculate the followings: a) The tensile strength of the annealed material. b) The initial diameter of the copper bar. Solution It is important to understand the question well. In this question, the copper bar is annealed first then a cold rolling operation is done on it. Initial diameter of the copper bar is same before and after the annealing operation. a) Flow stress of the plastically deformed bar could be shown as shown in Course Slides at UTS Then UTS of the original bar (no annealing, no cold working) is found as below: = 450 (0.33)0.33 = 312.12 MPa . As u u Since before necking occurs ( < n) area stays constant at the whole bar, the formula below could be used: By putting the area ratio into the formula (i) UTS of the annealed material is found as: b) For this question d0 can be found by using the ratio: if < n (which means necking is not started yet) with the UTScw value given in the question as UTScw = 390 MPa, to check the value So > n which means that necking started, then UTScw becomes equal to flow stress of the deformed material, Q2.2 A...

Words: 6030 - Pages: 25

Premium Essay

Manufacturing

...Vol. 3, No. 5 Modern Applied Science A Study of an Evaluation Model on Manufacturing Execution System in Paper-making Enterprises Zhihong Xu Key Lab for Paper Science and Technology of Ministry of Education Shandong Institute of Light Industry Shandong 250353, China E-mail: xzh1385@163.com Feng Huang The State Key Laboratory for Microbial Technology Shandong University, Shandong 250100, China Jiachuan Chen & Guihua Yang Key Lab for Paper Science and Technology of Ministry of Education Shandong Institute of Light Industry Shandong 250353, China Abstract Manufacturing execution system (MES) is a production management technology and real-time information system which lies between the enterprise upper layer (ERP) and the bottom layer (PLC/DCS) and faces to workshop layer. MES's concept, its functional model and its important status in the manufacture industry are introduced in this article. Based on the production practice in Kunshan Banknote Paper Mill, an evaluation model of EMS is set up. The model also has a certain reference value to the construction of management information system (MIS) for the relative industries. Keywords: Pulp and paper industry, Manufacturing execution system, Furzzy evaluating method 1. Introduction The construction of informationization has made considerable progress with years of development in domestic paper industry. Large and medium-sized paper-making enterprises has widely adopted Enterprise Resource Planning (ERP) for enterprise......

Words: 3133 - Pages: 13

Premium Essay

Yankee Candle

...1. I believe that what is next for Yankee Holding Company is to simply continue to grow and to lift the company up from the financial slump it encountered in 2007. Nowadays, customers are watching what they are spending their money on more. Therefore, being the leader in the market, Yankee Candle must establish their brand, expand retail and wholesale networks and introduce new fragrances. The company has a strong foundation and with its innovation, the only way to continue is by expanding. Opening more stores is a good idea for the company to continue building its brand recognition. Possibly appealing to a new target market could also be a route to take. Designing a line of products that would appeal to a younger market would be my suggestion. Perhaps even making the candles flameless, but not losing the uniqueness of the scents. Younger generations tend to like the innovation of flameless scents. Also, college dorms often do not allow candles because of fire hazards. Manufacturing flameless candles with the signature scents of YCC can eliminate this issue. Also, Aroma Naturals operates primarily as an online retailer; a good idea would be to open stores for this brand as well. I checked out their website and it is a very interesting theory of aromatherapy. “The therapeutic use of pure plant essential oils to bring well-being to both mind and body”, is an invigorating aspect to pursue. Many loyal customers of Yankee Candle value the authenticity of the product and the......

Words: 888 - Pages: 4

Premium Essay

Yankee Fork Matrix

...customers, thus net income will be lower than where it could be. | The key question(s) that needs to be answered to solve this problem is… What method of inventory should be usedWho should do the forecastingHow can Yankee Fork increase profits while decreasing cost while ensuring that the company has the adequate amount of inventoryWhat inventory should Yankee Fork promote and when should it be promotedHow can Yankee Fork become more competitive | Step 2: Obtain information. The following information is needed to answer this question… Interview Phil Stanton (ask him about delivery service use, machinery usage, and the accuracy of the inventory)Interview Ron (ask him about regional sales, promotions and non-adjusted items) Observe the production layoutNeed to find out what promotions are being run and how often and which location are they being run.Yankee Fork need to find out if this is a job shop, batch hop, or an assembly lineYankee Fork need to find out Yankee Fork’s budgetYankee Fork need to find out which accounting method is being utilized (FIFO or LIFO)Yankee Fork need to find out about delivery service (how often is it being used, where is it being used what method is being used, and exactly what are the consumers delivery complaints specifically).Yankee Fork need to observe or competition | Some important assumptions I am using in my thinking are… (Figure out what you are taking for granted. Make sure these assumptions are reasonable. Watch out for......

Words: 725 - Pages: 3

Free Essay

Celluar Manufacturing

...Amanda Alt Sarah McCauley Kevin Randles Kexin Kie Ranesha Williams Cellular Manufacturing A manufacturing cell is a grouping of all the resources that are required to manufacture a part of a product. This includes the people, supplies, machines, tools and the equipment. The cell resources are arranged in close proximity to enhance communication and allow everyone to see what is going on in their particular part of the job. There are two types of cells and they are Product Cell and Process Cell. A product cell provides a finished product to one or to a few customers and team members typically assemble, test, package, and even ship the product. A process cell services multiple customers and completes multiple operations on a variety of products. There are several benefits of manufacturing cells. They allow you to product what is needed with minimum materials, equipment, labor, time and space. This all in all typically lowers operating costs. A cell has a simple and direct routing between operations which ultimately reduces leadtimes. Cells can also help eliminate waste by reducing excess inventory. Cells also reduce the waiting time for operators. They do not have to wait for supplies or tools as they are readily available at the cell. Workers will benefit from not needing to move throughout the plant because everything they need to do their job is kept in the cell. In-plant transportation is also reduced, as there is no need to truck parts from department to......

Words: 713 - Pages: 3

Premium Essay

Yankee

...Yankee is a company that produces garden tools that are sold in four different product lines ranging from top-of-the-line to economy and the tools they produce ranges from mortar pans, wheelbarrows, shovels, rakes, trowels to hand trucks. The garden tools market is very competitive and mature as the products have very simple designs and there are many competitors in the market. Furthermore, substitutes are (power-generated tools) are available in the market. Yankee needs to keep prices low while focusing on reliable delivery and high quality to keep its position as a leading producer. Yankee has no formal method to forecast demand. The marketing team forecasts demand by month for the following year and the numbers they give to the operations side is said to be inflated, and they will reduce the forecasted numbers by approximately 10%. This shows that there is no collaboration and trust between the marketing and operations teams in forecasting demand which leads to delays in shipment to customers. Furthermore, the marketing team uses “shipping data” from the past year to discuss about promotions, changes in the economy and shortage problems from the past year and based on these, they will come up with the demand forecast for next year. This will not be an accurate and reliable forecast as compared to using the actual demand numbers. The operations team does not keep any inventory at hand because they are concerned about the high costs that comes with it, but there is no......

Words: 268 - Pages: 2

Premium Essay

Case Study Analysis: Yankee Fork and Hoe Company

...Yankee Fork and Hoe Company Case Questions 1. Comment on the forecasting system being used by Yankee. Suggest changes or improvements that you believe are justified. It seems as if Ron Adams is forecasting his figures by meeting managers from various sale regions to go over shipping data from last year. He did not use an calculations in order to explain his forecast. Ron has been using only qualitative analysis as opposed to quantitative analysis. By using quantitative analysis, Ron could gain some advantages of quick forecast and experiences from managers. He could also come across disadvantages in qualitative analysis such as group thinking and the forecasts usually tends to be overly inflated. This is especially related to Phil Stanton the production manager since he said that forecasts are usually inflated and he usually reduces the forecast by 10%. The quantitative method should be used in this forecast. The quantitative analysis is suitable for the existing products that have stable demand and historical data. Looking at the demand from the last 4 years, the product tends to fall in seasonal pattern and not much has been changed in each year. A suggestion for Ron is to use the seasonality technique with linear trend equation to calculate the future demand for the following fifth year. In doing so, Ron could be exposed to more accurate forecast in regards to the difference in demand for each month. The forecasting technique used by the marketing department is......

Words: 750 - Pages: 3

Premium Essay

Manufacturing Accounting

...Riordian Manufacturing Accounting Riordan Manufacturing, Inc., the global leader in the field of plastic injection molding. The company produces plastic bottles, fans of all sizes, heart valves, medical stents and custom plastic parts. Riordan Manufacturing is fully owned by Riordan Industries and has 550 employees and generates an excess of $1 billion in revenue with a projected $46 million of annual earnings. Riordan has facilities in San Jose, California, Albany, Georgia, Pontiac, Michigan, and Hangzhou, China. Riordan has demonstrated they can be very successful and contend with their competitors as a Fortune 1000 company. There are a few major economic influences affecting Riordan’s operations and strategy including interest rates, unemployment rate, inflation rate, gross domestic product, consumer confidence and currency exchange rates. History Dr. Riordan started Riordan Manufacturing after purchasing a in 1992 when he obtained the venture capital to purchase a fan manufacturing plant in Pontiac, MI. Riordan’s primary plant for making custom plastic parts is the Michigan plant. In 1993 the company also began to produce plastic containers for beverages out of Albany, GA. The most recent the venture for Riordan is its expansion to China as the main manufacturer of fans. Riordan’s main customers are automotive parts manufacturers, aircraft manufacturers, the Department of Defense, beverage makers and bottlers, and appliance manufacturers. Riordan Accounting......

Words: 1479 - Pages: 6

Free Essay

Manufacturing

...Valery Marinov, Manufacturing Technology Cutting Forcess 71 5.3 CUTTING FORCES Introduction Cutting is a process of extensive stresses and plastic deformations. The high compressive and frictional contact stresses on the tool face result in a substantial cutting force F. chip tool F` cut F workpiece Total cutting force F and reaction force F` in orthogonal cutting Knowledge of the cutting forces is essential for the following reasons: v v v v proper design of the cutting tools proper design of the fixtures used to hold the workpiece and cutting tool calculation of the machine tool power selection of the cutting conditions to avoid an excessive distortion of the workpiece Cutting force components In orthogonal cutting, the total cutting force F is conveniently resolved into two components in the horizontal and vertical direction, which can be directly measured using a force measuring device called a dynamometer. If the force and force components are plotted at the tool point instead of at their actual points of application along the shear plane and tool face, we obtain a convenient and compact diagram. chip tool cut F FC FD workpiece Total cutting force F is conveniently resolved into horizontal component FC and vertical component FD The two force components act against the tool: ΠCutting force FC : this force is in the direction of primary motion. The cutting force constitutes about 70~80 % of the total force F and is used...

Words: 785 - Pages: 4