Free Essay

Transfer Time

In: Computers and Technology

Submitted By Dacrazefury
Words 589
Pages 3
3/31/16
Brian Rodriguez
NS1110
Professor David Durniok
Assignment 2

Transfer Time

1. Fill in the Transfer Time column in Table 1. State all times in appropriate units (seconds, minutes, or hours). Show all your calculations and number conversions.

File Size | Transfer Rate | Transfer Time | 100 MB | 56 Kbps | 5 hrs | 100 MB | 4 Mbps | 3.3 minutes | 2 GB | 56 Kbps | 83.22 hours | 2 GB | 4 Mbps | 1 hr, 8 mins, 16 seconds |

* Take the 56kbps = 56,000 BITS per second, divide by 10 and you get 5,600 bytes. 100,000,000 / 5,600 = 17,857 seconds = 297.6 minutes = 4.96 hrs (almost 5 hrs) if there is no interruption in the transmittal.

* 4Mbps (megabits) equals to approximately 500KB/s (kilobytes).

100MB (Mega Bytes) equals approximately 100000 KB

So assuming you can have a perfect transfer rate of 500KB/sec (assuming there is no TCP/IP overhead) you divide 100000KB by your 500KB/Sec transfer rate:

100000
/5000
= 200 seconds

200 seconds divided by 60 = 3.3 minutes.

* 2GB * 1024MB/GB = 2048MB
2048MB * 1024KB/MB = 2097152 KB
2097152KB * 8Kb/KB = 16777216 Kb
16777216Kb / 56Kb/s = 299593s
299593s / 3600s/h = 83.22h

so, at the theoretical rate of 56Kb/s, it would take 83.22 hours do download a 2GB file. At a more realistic average download rate of 4Kb/s, it would take 322.88 hours or just under two weeks to download.

* 4 Mbps = 0.5 MB/s

The transfer rate is 0.5 MB/s

2048 / 0.5 = 4096 seconds

Time taken = 1 hour 8 minutes 16 seconds

2. Fill in the File Size column in Table 2. State all sizes in appropriate units (KB, MB, or GB). Show all your calculations and number conversions.

Transfer Rate | Transfer Time | File Size | 56 Kbps | 30 minutes | 12.6MB | 4 Mbps | 10 minutes | 2.4MB | 56 Kbps | 4 hours | 785.7MB | 4 Mbps | 2 hours | 4800 MB |

* 56000bits/second = 56000/8 bytes per second for 30 minutes, effectively it should be able to download, 7kbytes * 1800
Hence, the file size is 12.6MB or

* A file at a rate of 4 Mbps (Megabits per second) for a period of 10 minutes.

You would multiply the transfer rate (4 Mbps) by 60 (the number of seconds in a minute), then multiply that by 10 (the number of minutes it's taking).

* File size will be
56*3600(One hour has 3600 seconds)*4
806400 kb = 785.7 MB

* 4 Mbps == 4Mb * 60 * 10 = 2400 Mb (Megabytes)

3. Comment on the relationship among file size, transfer rate, and transfer time. How are they related?

* If the transfer connection and software is decent, then the relationship should be as follows: Transfer rate is constant, file size is arbitrary, and transfer time is proportional to file size and the reciprocal of transfer rate.

If we call the transfer rate R, the transfer time T, and the file size S, we have:

T = S/R

We can rearrange this to get:

S = R*T
R = S/T

Citation: Yahoo Answer/Toms Hardware http://answers.yahoo.com/question/index?qid=20130517001423AAC7zRQ http://www.tomshardware.com/forum/287554-32-calculate-100mb-4mbps-tranfer-time http://answers.yahoo.com/question/index?qid=20130517001423AAC7zRQ http://www.tomshardware.com/answers/id-1975822/transfer-time-file-size-2gb-transfer-rate-56kbps.html http://answers.yahoo.com/question/index?qid=20140106222944AARTnA9 http://answers.yahoo.com/question/index?qid=20130116124203AAbQVyi http://answers.yahoo.com/question/index?qid=20121017174932AAeYVOM http://answers.yahoo.com/question/index?qid=20130704102319AAxXFDc
http://answers.yahoo.com/question/index?qid=20130107101012AAXsTCE…...

Similar Documents

Free Essay

Nt 1110 Transfer Time

...Transfer Time 1 Transfer Time and File Size Transfer Time 2 Abstract Calculating Transfer Rate, Transfer Time and File size can be pretty difficult unless one has a basic knowledge of binary numbers and the different types of storage capacities that are out there. In order to figure out how fast a download will take there is some math that needs to be figured out and in this paper I will mention the way to conquer this task. Transfer Time 3 Transfer Time and File Size The very first step to understanding transfer time and file size is to first know that 1 byte is equal to 8 bits as well as what each component is exactly. A bit is defined as:” a single basic unit of information, used in connection with computers and electronic communication”. (Quote, n.d.) A byte is “pronounced ‘bite’, is the next size up basic unit of measurement for information storage, usually consisting of 8 bits”. (Quote, n.d.) The next set of terms that are used is: Kilo (kilobytes) equal to 1,000 bits stated in decimal form or 1,024 bytes stated in binary form. Then we have Mega (megabytes) equal to 1,000,000 decimal bits or 1,048,576 binary bits. Next is one of the bigger bytes and that is Giga (gigabytes) which is equal to 1,000,000,000 decimal bits or 1,073,741,824 binary bits. After figuring out the numbers to these complex bits of information, the next step is to understand the speed of transferring data. This is simply downloading......

Words: 1000 - Pages: 4

Premium Essay

Transfer Price

...Introduction Transfer pricing has long been an important cost management topic for transactions among domestic subsidiaries. The concern is to promote actions and behaviors that seek to maximize the corporate performance and profitability rather than the subsidiary performance. Unlike transfer pricing between two divisions of the same company, this transactions between subsidiaries cross international boundaries, involve tax issues concerning the determination, analysis and adjustment of prices between this related entities. I. Transfer price 1. Transfer price definition The transfer prices are the prices at which an enterprise transfers physical goods and intangible property or provides services to associate enterprises. They are the prices charged for any transaction between affiliates entities. This transfer may be commercial, financial or technical. According to the OECD, two companies are associated if one of the enterprises participates directly or indirectly in the governance, management, control or the capital of the other or if the same persons participate directly or indirectly to the management, control or the capital of both enterprises. They can be defined simply as transactions prices between companies of the same group and resident in different states. This type of transactions involves intra-group transactions crossing borders. Example: Within a MNE group, a subsidiary A established in France sells computers to another subsidiary B......

Words: 2245 - Pages: 9

Premium Essay

Transfer Pricing

...accounting, Profit & Investment centers, and highlighting examples relevant to each. • Financial Decision Measures Financial Decisions Financial Decisions are decisions that involve: (1) Determining the proper amount of funds to employ in a firm (2) Selecting projects and capital expenditure analysis (3) Sourcing funds on the most favorable terms possible (4) Managing working capital such as inventory and accounts receivable. Financial Decision Measures There are three fundamental concepts that underlie the process of making many financial decisions.  They are also the three fundamental concepts that determine the economic value of any project, investment, or business organization.  The three concepts are; a) Time Value of Money b) Risk-Return Relationship c) Cash Flows • Responsibility accounting This is an underlying concept of accounting performance measurement systems. The basic idea is that large diversified organizations are difficult, if not impossible to manage as a single segment, thus they must be decentralized or separated into manageable parts. The objective is to assist in the planning and control of a company’s responsibility centers—such as decentralized departments and divisions. These parts, or segments are referred to as responsibility centers that include: a) Revenue centers b) Cost centers c) Profit centers d) Investment centers This approach allows responsibility to be assigned......

Words: 1522 - Pages: 7

Free Essay

Transfer Pricing

... * An MNE using the CUP method to determine its transfer price must first identify all the differences between its product and that of the independent manufacturer. The MNE must then determine whether these differences have a material effect on the price, and adjust the price of products sold by the independent manufacturer to reflect these differences, to arrive at an arm’s length price. A comparability analysis under the CUP method should consider amongst others the following: * Product characteristics such as physical features and quality. * If the product is in the form of services, the nature and extent of such services provided. * Whether the goods sold are compared at the same points in the production chain. * Product differentiation in the form of patented features such as trademarks, design, etc. * Volume of sales if it has an effect on price. * Timing of sale if it is affected by seasonal fluctuations or other changes in market conditions. * Whether costs of transport, packaging, marketing, advertising, and warranty are included in the deal. * Whether the products are sold in places where theeconomic conditions are the same. Example 1 Taxpayer A, an MNE sells 70% of its product to an overseas associated company B, at a price of RM100 per unit. At the same time, the remaining 30% of that product is sold to a local independent enterprise C at RM150 per unit. B Transfer price 100 A C Arm’s length price ...

Words: 1266 - Pages: 6

Premium Essay

Transfer Prices

...TRANSFER PRICING Overview The essential feature of decentralization in large firms is the creation of responsibility centers (e.g. cost, profit, or investment centers). The performance of these responsibility centers is evaluated on the basis of various accounting numbers, such as standard and actual cost, divisional profit or return on investment. A central role of the management accounting system therefore is to evaluate (i.e. attach a dollar figure to) the transactions between the different responsibility centers. Under the subject cost allocation we studied alternative methods to charge user departments for the services rendered by service departments (frequently cost centers). Transfer prices are used to evaluate the goods and services exchanged between profit centers (divisions) of a decentralized firm. Hence, the transfer price is the price that one division of a company charges another division of the same company for a product transferred between the two divisions. 1. There are no cash flows between the divisions. The transfer price is used only for accounting purposes. 2. The transfer price becomes an expense for the receiving manager and a revenue for the supplying manager. 3. If intra-company transfers are accounted for at prices in excess of cost, appropriate elimination entries have to be made for external reporting purposes. Examples of items to be eliminated for consolidated financial statements include: 4.......

Words: 1287 - Pages: 6

Premium Essay

Transfer Credits

...Unit 4 Assignment- Part II Why have you chosen the elective classes included in your degree plan? If you are using transfer credit, why have you chosen to include the transfer credit that you have selected to complete your degree plan? I chose to transfer credits from my prior education at University of Maryland and Kaplan University because they can help me in my current degree program but still allow me flexibility if I decide later that I want to change direction in my career. The classes not only apply in areas of social work but also in certain areas of healthcare and healthcare management, gerontology and health care aides. The electives show that I have the knowledge in those areas and it can be applied in all the job fields. Transferring my credits will also allow me to complete my degree plan in a quicker amount of time. I want to finish my degree as soon as possible but doing it with the knowledge that I need to allow me to succeed, not just get it over with. What skills and knowledge do you expect to learn from these classes? If you are using transfer credits, what skills and knowledge have you learned from those courses? I have learned the importance of communication skills, both verbal and nonverbal, and the importance of those skills. They also taught me the difference in cultures and beliefs and that it is imperative and important for me as a professional to not judge others. I learned to be impartial and fair in every......

Words: 597 - Pages: 3

Free Essay

Transfer Time

...Transfer Time From using a various calculators to determine transfer rates, transfer time and file size it was easily noticed how they were all related. All three variables must be utilized in order to discern a particular transfer rate, transfer time or file size. The transfer time of a file is directly related to the speed in which it is transferred. How quickly a file is transferred primary depends on the size of the file and the speed in with the file is being transferred. The quicker the transfer speed the quicker the file transfer was completed. The same file could take twice as long to transfer if the transfer speed was half as fast. For example, a file that is 2 GB will take at least 91 hours to transfer at the rate of 56 Kbps. However, if the transfer rate for this file was 4 Mbps it will only take a little over an hour to transfer. A file that is 100 MB will take over four hours to transfer at the rate of 56 Kbps. When the rate is 4 Mbps the entire file will be transferred in less than four minutes. It is clear that the larger the file the longer the transfer time. The smaller the file; the shorter transfer time will be. This is if the transfer rate for each file is the same. Calculating the transfer rate, transfer time and file size is done with basic math. In order to calculate the transfer time for a file you multiply the file size by the speed at which the information is going to be transferred. If one wanted to......

Words: 335 - Pages: 2

Free Essay

Technology Transfer

...Industrial Promotion and Technology Branch TECHNOLOGY PAPER SERIES 6/05 Technology Transfer and Trade: The Toy Industry in India UNITED NATIONS INDUSTRIAL DEVELOPMENT ORGANIZATION I N D U S T R I A L P R O M OT I O N A N D T EC H N O LO GY B R A N C H Technology Transfer and Trade: The Toy Industry in India TECHNOLOGY PAPER SERIES TPS 6/05 December 2005 UNITED NATIONS INDUSTRIAL DEVELOPMENT ORGANIZATION Vienna, 2005 UNIDO Industrial Promotion and Technology Branch Technology Paper Series TPS No. 6/2005 December 2005 Technology Transfer & Trade in Toy Industry of India Copyright © 2004 by United Nations Industrial Development Organization (UNIDO) The designati ons employed and the presentation of the material in this document do not imply the expression of any opinion whatsoever on the part of the Secretariat of the United Nations Industrial Development Organization (UNIDO) concerning the legal status of any country, territory, city or area or of its authorities, or concerning the delimitation of its frontiers or boundaries. The responsibility for options expressed rests solely with the authors, and publication does not constitute an endorsement by UNIDO of the opinions expressed. This document has been produced without formal editing. The views expressed in this report do not necessarily reflect the views of the Secretariat of the United Nations Industrial Development Organization. Any indication of, or reference to, a country,......

Words: 7419 - Pages: 30

Free Essay

Transfer Time

...Most people who use computers are clueless to the internal ways that computers work. Here we will be talking a little about why a computer user might need to be familiar with things such as the binary system, Boolean operations, and the time it takes to transfer data. The average computer user is probably not aware that the actual operations of a computer are done with a binary system. Most of the time a typical computer user has no need to think about this aspect of computers, but every now and then the underlying binary nature will manifest itself. It’s more likely they will encounter a more compact variant of the binary system, called hexadecimal (or “hex” for short). Hex can come up on a Windows error message and the hex addresses may help pinpoint the source of trouble. Hex can also be used by spammers to hide their internet addresses. Another place where hex numbers commonly occur is in hypertext markup language (HTML) code where they are used to designate colors. Boolean Operators are simple words (AND, OR, NOT) used to combine or exclude keywords in a search, resulting in more focused and productive results. Using these operators can greatly reduce or expand the amount of records returned. They are useful in saving time by focusing searches for more ‘on-target’ results that are more appropriate to your needs. The AND operator narrows the search by requiring both terms to be in each item returned. If one term is contained in the document and the other is not, the......

Words: 504 - Pages: 3

Free Essay

Unit 2 Assignment 1 Transfer Time

...Unit 2 Assignment 1: Transfer Time File Size | Transfer Rate | Transfer Time | 100 MB | 56 Kbps | 15 seconds | 100 MB | 4 Mbps | .2 seconds | 2 GB | 56 Kbps | 4 minutes 46 seconds | 2 GB | 4 Mbps | 4 seconds | (100 MB x 1,000 x 8) / (56 Kbps x 1000) = 15 seconds (100 MB x 1,000 x 8) / (4 Mbps x 1,000 x 1,000) = .2 seconds (2 GB x 1,000 x 1,000 x 8) / (56 Kbps x 1,000) = 286 seconds = 4 minutes 46 seconds (2 GB x 1,000 x 1,000 x 8) / (4 Mbps x 1000 x 1,000) = 4 seconds Transfer Rate | Transfer Time | File Size | 56 Kbps | 30 minutes | 12.6 MB | 4 Mbps | 10 minutes | 300 MB | 56 Kbps | 4 hours | 100.8 MB | 4 Mbps | 2 hours | 3.6 GB | (30 min. x 60 sec.) x (56 Kbps x 1000) = 100,800,000 b (100,800,000 b / 8) / 1000 = 12,600 KB = 12.6 MB (10 min. x 60 sec.) x (4 Mbps x 1000 x 1,000) = 2,400,000,000 b (2,400,000,000 b / 8) / 1000 = 300,000 KB = 300 MB (4 hrs. x 60 min. x 60 sec.) x (56 Kbps x 1000) = 806,400,000 b (806,400,000 b / 8) / 1000 = 100,800 KB = 100.8 MB (2 hrs. x 60 min. x 60 sec.) x (4 Mbps x 1000 x 1,000) = 28,800,000,000 b (28,800,000,000 b / 8) / 1000 = 3,600,000 KB = 3,600 MB = 3.6 GB A file can only transfer as fast as the transfer rate will allow. How long it takes to transfer a single file depends on how big the file is and how fast the transfer rate is. Everything depends on the other....

Words: 306 - Pages: 2

Premium Essay

Transfer Pricing

...over time in order to survive and become profitable. Increased size often allows economies of scale in both production and distribution. Companies can develop new earning potential by expanding and add greater stability to earnings through diversification. Complex organizational structures help achieve business objectives such as increased profitability and reduced risks. Also, these complex structures allow the company to reduce its overall tax burden. One such strategy is discussed in this paper. Transfer pricing allows the company to price the inter-company transactions. Transfer pricing simplifies the accounting of transactions that take place between affiliated or related entities. Companies have freedom in valuing inter-company transactions. But, if strategically implemented, this strategy allows the company to save taxes and retain large amount of profits. Keywords: Transfer mispricing, tax-havens, Double Irish Dutch Arrangement Transfer Pricing Transfer pricing is the methodology used to set the prices for goods sold or services provided between related entities within an enterprise. Related entities are those which are under control of a single corporation and include branches and companies that are wholly or majority owned ultimately by the parent company. Generally, such a transfer price should be equal to the price which the entity would charge to an independent customer, an arm’s length customer. Such a price is termed as an “arm’s length price” (Transfer......

Words: 3264 - Pages: 14

Free Essay

Transfer Pricing

...SOAL LATIHAN TRANSFER PRICING SOAL 1: PT PARAHYANGAN INDUSTRYmemilikibeberapadivisiusahanyadansalahsatunyaadalahdivisiA yang khususmemproduksiproduk spare part denganmerk ‘PLAZO’ yang selamainidijualkepasareksternal. Padaawaltahun 2008, PT PARAHYANGAN INDUSTRY membentuk 1 divisibarulagiyaitudivisi F untukmemproduksiproduk ‘METAZO’, danuntukmenghasilkanproduk METAZO inijugadiperlukan spare part seperti yang dihasilkanolehdivisi A. Divisi F jugamendapatkanpenawarandaripihakluaruntukmembeliproduk spare part tsb yang samaseperti yang dihasilkanolehdivisi A. Di bawahinibeberapa data produksidan data lainnyadaridivisiA, sbb: * Kapasitasproduksi normal setahununtukproduk PLAZO adalah 250.000 unit, dansampaisaatinidivisi A barudapatmenggunakankapasitasproduksinyasebesar 75% darikapasitas yang ada, danseluruhproduk yang diproduksidapatterjualkepasareksternaldenganharga per unit Rp. 31.000. * Biayaproduksiuntukmembuat spare part PLAZO adalahsbb: * BahanlangsungRp. 1.350.000.000. * UpahlangsungRp. 768.750.000.000. * Variable conversion cost Rp.1.425.000.000. * Manufacturing Overhead cost Rp. 1.856.250.000. * Biaya Variable SGA per unit Rp. 3.200, dari jumlah mana sebanyak 30% dapat dihindarkan apabila terjadi internal sales antar divisi. * Biaya Fixed SGA per tahun sebesar Rp. 824.031.250, dimana 35% merupakan sunk cost. Divisi F bisa membeliprodukspare part tsb dari supplier luardenganhargaRp. 28.500/unit. Pertanyaan : a) Hitunglah di antara......

Words: 2110 - Pages: 9

Premium Essay

Calculating Transfer Time

...Calculating transfer time File Size | Transfer Rate | Transfer Time | 100MB | 56 Kbps | 14286 bps | 100 MB | 4 Mbps | 2 bps | 2 GB | 56 Mbps | 35714 bps | 2 GB | 4 Mbps | 500 bps | Calculating file size Transfer Rate | Transfer Time | File Size | Minutes | Seconds | 56 Kbps | 30 Minutes | 100800000 | | 1800 | 4 Mbps | 10 Minute | 144000000000 | | 600 | 56 Kbps | 4 Hours | 193536000000 | 240 | 14400 | 4 Mbps | 2 Hours | 3456000000000 | 120 | 7200 | Dell OptiPlex 3020 mini tower | Toshiba 15.6" Satellite Radius 2-in-1 Processor: Intel core i7-5500uHard Drive: 1TBMemory: 8GBPrices: $999.99 | Processor: 4th generation intel core, i3Memory: 4GBHard Drive: 500gbPrices: $529.00 | | Cyber power PC gamer ultra GUA500 desktop Memory: 16GB Hard Drive: 2TB 7200 rpm Processor: 4.0 GHZ AMD FIX-8350 VISHERA 8-CORE Prices: 839.95 | HP – ENVY 17.3” Processor: 5th gen intel core i7 – 5500u Memory: 16 GB Hard Drive: 1TB Prices: $1049.99 | 1. With technology now a day, there are so many choices to pick from. Most lawyer will used laptop over a desktop computer, because they want to have that ability to carry their documents around. Like in coat, visit to the client etc. A lawyer will only need five things. Processor or ram, battery life, DVD/cd, wireless capabilities, cost and weigh. The most important one is Processor of i3 or i5. RAM of 2GB will be good,...

Words: 590 - Pages: 3

Free Essay

Transfer

...consideration: | University minimum required cumulative average for consideration: | Notes: Transfer credits upto 1 year | | | | | Bachelor of Commerce | 75% | 70% | In addition, applicants must present 4U English and Advanced Functions for all majors, plus one additional 4U math (or equivalent) when applying to Accounting, Food and Agricultural Business, Human Resources Management, Management Economics and Finance, Marketing Management and Real Estate and Housing majors. | TRANSFER CREDITS University of Guelph- BCom Brock University- BAcc,BBA Entry Credential | Minimum Admission Average * | Transfer credits awarded ** | Notes | 2-year diploma | B- | 3.0-5.0 Credits | Honours degrees are comprised of 20.0 credits, three-year pass degrees are 15.0 credits | University of Waterloo- Bachelors in accounting and Finance Management If you’re applying from college, you can receive transfer credit for up to 50% of the courses needed for your Waterloo degree. To earn a Waterloo degree, you’ll need to complete at least 50% of your Waterloo degree requirements while registered in your new academic program. You must meet all requirements of your Waterloo academic plan in order to graduate, regardless of the number of transfer credits that you receive. * If you are admitted into an honours or 4-year general program, you can receive up to 10 units of transfer credit (the equivalent of 2 years of study). Accounting and Financial......

Words: 303 - Pages: 2

Premium Essay

Transfer Pricing

...Accounting 1 Session 1, 2011 Tutorial Week 8 - Transfer pricing Tutorial Questions Overall Theme In previous weeks we have focused our attention on the use of management accounting information for costing purposes (e.g. ABC), processes improvement (e.g. ABM, process analysis), and for budget control (standard cost analysis). This week we switch our attention to another aspect of management accounting by exploring the concept of responsibility accounting. We look at how management accounting system can be designed to encourage desirable (goal-congruent) managerial behaviour and to reflect the autonomous nature of contemporary, de-centralised organisations. In particular, we examine two control mechanisms used in conjunction with the responsibility accounting system, namely, transfer pricing. We will consider how managers determine transfer prices, rationales behind these systems, their benefits and limitations. Along the way we will also consider the impact of interdependencies and why variability can play havoc on management accounting systems. Desired Learning Outcomes and Essential Reading Mowen et. al. (2010): • Chapter 10: p368-374 • Chapter 13: p508-513; p523-535. TOPIC 6 TRANSFER PRICING After completing this topic, you should be able to: • • • • Explain the benefits and costs of decentralisation Explain the benefits of transfer pricing systems Understand the differences between the types of responsibility accounting systems Determine transfer prices using various......

Words: 1244 - Pages: 5