Premium Essay

Fluid

In: Other Topics

Submitted By csotelo
Words 338
Pages 2
Nurs 2820
Fluid, Electrolyte, and Acid-Base Balance

Name: _______________________________________
Case Study
Jimmy Lewis is brought to the hospital emergency room by some friends. He had been vomiting for several days and was complaining of heart palpitations. Mr. Lewis is a 58-year-old white male who is homeless. He has not had any health care for at least 10 years. He is an alcoholic and drinks a quart of gin or vodka every day. He does not have a job, and his family is all out of state. The emergency physician does an initial assessment and transfers him to a hospitalist, who admits him to a medical-surgical unit for further evaluation and treatment. Mr. Lewis has lab work drawn. His electrolytes are as follows: sodium 138 mEq/L, potassium 3.1 mEq/L (low), chloride 104 mEq/L, and magnesium 1.5 mEq/L (low). His arterial blood gas measurements are as follows: pH 7.48 (high), PaCO2 40 mm Hg, HCO3 29 (high). Jamie Taylor, a 22-year-old nursing student, is assigned to Mr. Lewis. She reviews Mr. Lewis’ medical record before going in to assess him.

1. After reviewing his chart and lab work, what fluid and electrolyte imbalances would Jamie determine? (Select all that Apply)

A. Fluid volume deficit
B. Hypokalemia
C. Hypermagnesemia
D. Hyperkalemia
E. Hypomagnesemia

2. What acid-base imbalance is Mr. Lewis experiencing?

A. Metabolic acidosis
B. Respiratory acidosis
C. Metabolic alkalosis
D. Respiratory alkalosis

3. The hospitalist orders an IV of D5NS to run at 125 ml/hour. What type of fluid is this? Why would this type of fluid be ordered?

A. Hypotonic
B. Isotonic
C. Hypertonic

4. Two hours after the IV is started, Mr. Lewis complains of pain at the insertion site. Jamie assesses the site and notes that it is cool to touch around the site and is edematous. She tries to obtain a blood return and does not get any return. This indicates…...

Similar Documents

Free Essay

Parts Description of a Fluid Canister

...Responsibility: Parts Description. Fluid canister This is a red cylindrical aluminum container of height 18cm that holds the fluid. It has a flat bottom of diameter 8.4 cm and a neck of diameter 3.5 cm. The mouth of the can has an external thread of 0.3 cm where the cap screws onto. The canister is also ribbed at the three quarter mark up the cylindrical section. Handle The handle is u-shaped flat aluminum bar of width 1cm. It is 8.5 cm long. The sides of the bar are bent towards the canister with the side farthest from the canister overlapping with the one closest and bent vertically up to hold the trigger. The vertical portion has a rectangular slit of 0.1cm by 0.6cm through which the trigger passes to attach to the plunger mechanism. Trigger This is a 1cm by 0.5cm aluminum bar that passes through the vertical projection of the handle and attaches to the plunger mechanism. Plunger The plunger is12.3cm long, cylindrical and hollow. It is open at both ends with a steel ball resting at the bottom part. The bottom brim of the plunger is slightly curved inwards to hold the steel ball. The plunger attaches to the nozzle and tube assembly via a hole bored through the cap of the canister. Plunger spring This is a helical spring that the plunger is fitted through. It is 4.5 cm long from the top of the plunger. It rests between the cap of the plunger and a tightly fitted flat ring that is fixed at the mid section of the plunger. Steel ball The......

Words: 429 - Pages: 2

Free Essay

Fluids

...   It   is generally  known  that  water  boils  at   100°C,  but  really  that  is  only  true  if  the  water  is  at  a pressure  of If  the  water  pressure  increases  so  too  does  its  boiling  point, and  vice  versa.  The  relationship  between  pressure  and  temperature  of boiling  water  can  be plotted  on  a  so-called  transition  or phase  diagram  (Figure  1).  In  this  lab,  the  boiling  of water will be studied  and  plotted on a transition  diagram. Liquid 9 s \ 1- Solid A J    Vapour / i! ! 0.01 Temperature Figure  1:   Phase  Diagram  of Water TM PDF Editor Lab Worksheet Apparatus The  apparatus comprises  a  boiler and  a  heating element  (Figure  2).  The  boiler (and  the fluid it  contains)  is  separated  from  the  surroundings  by  isolating valves. Pressure Saturated vapour \ valve T1 Filling point Isolating valve Viewing  port Boiler Heating  elements Figure  2 TH3  Saturation  Pressure  Apparatus In   setting  up   the   laboratory,   the   water   is   boiled   with  the   isolating  valves  open.   Vapour leaves  the  system,  pushing  out  any  atmospheric  gases  (oxygen  and  nitrogen).  During  your experimental   work,   you   will   heat   the   vessel   and   then   allow   it   to   cool,   monitoring   the temperature and  pressure as you do so. Measurement  Devices Temperature  measurement Platinum   resistance  thermometers  are......

Words: 806 - Pages: 4

Premium Essay

Fluids and Electrolyte Imbalance

...secretion network, and this leads to increased extracellular fluid volume, water intoxication, hyponatremia, increased excretion of urinary sodium. As fluid volume increases, stretched receptor in right atrium respond by increasing a second hormone Atrial Naturetic Factor (ANF). The release of ANF causes increased renal excretion of sodium which worsens hyponatremia. The most common cause of SIADH is lung cancer especially small cell cancer of the lung. In SIADH, there is decreased serum sodium level, increase urine osmolality, increased urinary sodium level, abnormal water load test result, decreased BUN, creatinine, and serum albumin secondary to dilution. QUESTION 3 The normal range of serum potassium is 3.5 – 5.0 mEq/L and calcium is 8.6 – 10mg/dl. According to George’s diagnostic studies, he is experiencing hypocalcaemia and hypokalemia. Patient is experiencing hyponatremia as result of excessive secretion of Anti diuretic Hormone in SIADH produced by tumor cells or by abnormal stimulation of the hypothalamic secretion network, and this leads to increased extracellular fluid volume, water intoxication, hyponatremia, increased excretion of urinary sodium. As a result of excessive urinary loss of sodium, aldosterone is hormone produced. Aldosterone increase reabsorption of sodium and secretion of potassium in the distal tubules of kidney enhancing sodium concentration of extra cellular fluid and potassium excretion in the urine, hereby reducing......

Words: 1673 - Pages: 7

Free Essay

Fluid Power

...HYDRAULICS LAB #1 The objective of this lab is to test the fluid flow provided by the power unit at various discharge pressures, and create a power unit characteristic curve. 1. Build on the trainer the hydraulic circuit shown in the figure below, using the components listed here. hydraulic power unit (2) pressure gauges flow control valve (FCV) – simulated load flow-meter Page 1 of 2 2. Initial setup: a. Fully close (CW) the FCV, and fully open (CCW) the pressure relief valve on the power unit. b. Start the power unit, and slowly adjust the pressure relief valve until pressure gauge P1 reaches 50 bar. Let the unit run for a few minutes then check and adjust P1 if necessary. c. Do not touch the pressure relief valve for the remainder of the lab. d. Fully open the FCV. 3. Test: a. Record the pressures P1, P2 and the flow rate under the “Min.” column in the table below. b. Slowly turn the FCV CW, adding a simulated load to the system. When the pressure at P1 increases to 15 bar, stop and record pressure P2 and the flow rate. c. Repeat for all columns listed in the table. The final column, listed as “Max Pres.” should be run with the FCV fully closed. Note the sound of the power unit during this test. You should detect changes in tone as the load (pressure) is increased. P1 Pressure (bar) P2 (bar) Flow Rate (lpm) Min * 15 20 25 30 35 40 45 46 47 48 49 Max. Pres. * minimum pressure attained, with flow control fully open HYDRAULICS LAB #1 Page 2 of 2 Lab......

Words: 638 - Pages: 3

Free Essay

Fluid Mechanics

...Fluid Mechanics Learning Objectives Outcomes • Explain the pressure-depth relationship. Pressure increases with depth. • Define Pascal’s Principle. Pascal's Principle states that the pressure is transmitted evenly through a liquid. • Describe how to use Pascal’s Principle in practical application. When you inflate a balloon with air, it expands evenly in all directions, this is an example. • Describe Archimedes Principle. States that the mass of a liquid displaced by a floating body is equal to the mass of that body. • Determine if an object will float in a fluid based on its relative densities. So if you fill a tumbler up with water to the brim, put an object into it, weigh the water that has been pushed out of the tumbler, and compare that with the weight of the object, you'll know whether it floats or not. • Use the continuity equation and Bernoulli’s equation to explain common effects of ideal fluid flow. The pressure in a fluid moving steadily without friction or outside energy input decreases when the fluid velocity increases Assignment Requirements 3. Mass is the same, so if the whale is taking up less volume, the density must have increased. The whale has displaced a greater mass of water at the depth, so the buoyant force is greater. 20. Ice cubes float in water, and sink in alcohol. Anything with less density than the liquid that it's in will float. 22. It will increase 35. It would be harder on the top of a mountain because the pressure of the......

Words: 342 - Pages: 2

Free Essay

Fluid Mechanics

...This is page i Printer: Opaque this A Mathematical Introduction to Fluid Mechanics Alexandre Chorin Department of Mathematics University of California, Berkeley Berkeley, California 94720-3840, USA Jerrold E. Marsden Control and Dynamical Systems, 107-81 California Institute of Technology Pasadena, California 91125, USA ii iii A Mathematical Introduction to Fluid Mechanics iv Library of Congress Cataloging in Publication Data Chorin, Alexandre A Mathematical Introduction to Fluid Mechanics, Third Edition (Texts in Applied Mathematics) Bibliography: in frontmatter Includes. 1. Fluid dynamics (Mathematics) 2. Dynamics (Mathematics) I. Marsden, Jerrold E. II. Title. III. Series. ISBN 0-387 97300-1 American Mathematics Society (MOS) Subject Classification (1980): 76-01, 76C05, 76D05, 76N05, 76N15 Copyright 1992 by Springer-Verlag Publishing Company, Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of the publisher, Springer-Verlag Publishing Company, Inc., 175 Fifth Avenue, New York, N.Y. 10010. Typesetting and illustrations prepared by June Meyermann, Gregory Kubota, and Wendy McKay The cover illustration shows a computer simulation of a shock diffraction by a pair of cylinders, by John Bell, Phillip Colella, William Crutchfield, Richard Pember, and Michael......

Words: 50231 - Pages: 201

Premium Essay

Fluid Mechanics

...Variation of Pressure vertically in a fluid under gravity P_2 A P_1 Force due to P_1 on area A acting up = P_1 A Force due P_2 on area A acting down = P_2 A Force due to the weight of the element =mg= ρA(z_2- z_1 )g Since the fluid is at rest, there can be no shear forces and hence no vertical forces on the side of element due to surrounding fluid. Considering upward as positive, sum of all forces = 0, We have P_1 A-P_2 A - ρA(z_2- z_1 )g=0 Or P_2- P_1= - ρ(z_2- z_1 )g So, under the influence of gravity , pressure decreases with the increase height. Equality of Pressure at the same level in a static fluid Since the fluid is at rest, there are no horizontal shear stresses on the sides of the element. For static equilibrium the sum of horizontal forces must be zero, P_1 A=P_2 A P_1=P_2 Therefore the pressure at any two points at the same level in a body of fluid at rest will be the same If the (x,y) is the horizontal plane then ∂p/∂x=0 and ∂p/∂y=0 Variation of pressure due to gravity from point to point in a static fluid Since the element is in equilibrium, the resultant of the forces in any direction should be zero Resolving forces in the axial direction, pA-(p+δp)A-ρgAδs cos⁡θ=0 δp=-ρgδs cos⁡θ Putting above equation in differential form, dp/ds=-ρgcos......

Words: 609 - Pages: 3

Premium Essay

Fluid Management

...Fluid Management Leadership Learning Experience A1. Problem or Issue Research shows that dialysis patients who have problems with fluid management have an increase in hospitalizations, disease processes, and poor clinical outcomes.  Research has also proven that fluid is a strong predictor of mortality and morbidity. A1a. Explanation of Problems or Issues We have noticed in our clinic a trend of increasing fluid overloaded patients over the last few months.  This trend has also resulted in multiple hospitalizations for congestive heart failure, pulmonary edema, and respiratory distress resulting from fluid overload.  This problem was selected after a patient expired in our clinic with cardiac arrest after a long code attempting to revive.  This topic of discussion made a big impact in our dialysis clinic because it is an open area that can be seen by all the patients.  Seeing a desperate attempt to save a life, it is not soon forgotten in the minds of a room full of people who all share the same disease.  The fear of what they have just seen could almost be read on their faces, most thinking that could have been me.  After every code, there is a review of what could have been done differently, as far as the code was concerned the process was correct.  However, looking back you wonder if there were something more you could have done to prevent the code altogether.  Not only was the patient someone whom I was given the responsibility of caring for, he was also......

Words: 2110 - Pages: 9

Premium Essay

Body Fluids

...BODY FLUIDS AND INTESTINAL GAS Waste from digestive tract Frequent discharge of liquid stool Black tarry stools-contain digested blood First stool of newborn Passage of bloody feces Matter EXPELLED from stomach thru mouth Vomitus Vomiting of blood Gas in digestive tract BODY FLUIDS AND INTESTINAL GAS Waste from digestive tract Frequent discharge of liquid stool Black tarry stools-contain digested blood First stool of newborn Passage of bloody feces Matter EXPELLED from stomach thru mouth Vomitus Vomiting of blood Gas in digestive tract OSTOMIES Creation of an artificial opening OSTOMIES Creation of an artificial opening 1--ELIMINATION OF SOLID WASTE ILE---OSTOMY Into ilieum, creating a stoma (mouth) COLO---STOMY --bag Into colon-creating a stoma (mouth) 1--ELIMINATION OF SOLID WASTE ILE---OSTOMY Into ilieum, creating a stoma (mouth) COLO---STOMY --bag Into colon-creating a stoma (mouth) 2---FEEDING (tubes) PURPOSES GASTR--OSTOMY Into stomach wall- through abdominal wall----- GASTRO—JEJUNUM--OSTOMY Between the stomach and jejunum GAVAGE Process of feeding a person through a NASO-GASTRIC tube 2---FEEDING (tubes) PURPOSES GASTR--OSTOMY Into stomach wall- through abdominal wall----- GASTRO—JEJUNUM--OSTOMY Between the stomach and jejunum GAVAGE Process of feeding a person through a NASO-GASTRIC tube ......

Words: 1433 - Pages: 6

Premium Essay

Body Fluid Analyses

...multicellular organisms like us, the situation is not so simple. There, too, each cell needs nutrients and produces wastes, but most of the cells are not directly in contact with the environment. So, body fluids serve as a medium for carrying nutrients and waste products from the cells as well as a means for carrying the chemical communicators that coordinate activities among cells. That’s why through the analysis of these body fluids we can easily diagnose and detect any diseases. These analyses of body fluids include the analysis of urine, blood, and saliva. Analyzing urine is still one of the simplest ways to screen a person quickly for underlying medical conditions. That’s why so many physician offices still perform routine urinalysis when you are getting a checkup. Urinalysis let us study the kidney and how the body forms urine, so that we can understand what things should and should not be present in a urine specimen, in this case the normal and abnormal constituents. Urine is a body fluid that is easily collected and usually plentiful, so that many laboratory tests can be performed which can access the function of the kidney as well as many other organs in the body. The analysis of urine is one of the oldest lab tests performed for these reasons. Since other body fluids share similarities to urine, we also study their physical, chemical, and microscopic components so that we can assess health or disease states. Blood analysis is commonly......

Words: 2693 - Pages: 11

Free Essay

Fluid Dynamics

...FLUID DYNAMICS In physics, fluid dynamics is a subdiscipline of fluid mechanics that deals with fluid flow—the natural science of fluids (liquids and gases) in motion. Fluid dynamics is "the branch of applied science that is concerned with the movement of liquids and gases," according to the American Heritage Dictionary. Fluid dynamics is one of two branches of fluid mechanics, which is the study of fluids and how forces affect them. (The other branch is fluid statics, which deals with fluids at rest.)  Scientists across several fields study fluid dynamics. Fluid dynamics provides methods for studying the evolution of stars, ocean currents, weather patterns, plate tectonics and even blood circulation. Some important technological applications of fluid dynamics include rocket engines, wind turbines, oil pipelines and air conditioning systems. FLOW The movement of liquids and gases is generally referred to as "flow," a concept that describes how fluids behave and how they interact with their surrounding environment — for example, water moving through a channel or pipe, or over a surface. Flow can be either steady or unsteady. In his lecture notes, "Lectures in Elementary Fluid Dynamics" (University of Kentucky, 2009) J. M. McDonough, a professor of engineering at the University of Kentucky, writes, "If all properties of a flow are independent of time, then the flow is steady; otherwise, it is unsteady." That is, steady flows do not change over time. An example......

Words: 1253 - Pages: 6

Free Essay

Fluids

...shall begin by studying incompressible flow problems. Of course all fluids are, to some extent, compressible but under steady flow conditions we may assume that the effects of changes in fluid density are small. In fact, it is the velocity of the fluid that dictates whether changes in density are significant and must be accounted for. In Chapter 6 we shall quantify the velocity limit, below which may assume that the fluid is incompressible; however, the majority of fluid flow problems that you are likely to encounter may be assumed to be incompressible. We shall focus in this chapter on incompressible flow, and on problems in which the fluid is bounded by a surface (we shall call this internal flow); the next chapter will focus on unbounded (or external) fluid flow problems. Both chapters will study real fluid flows and do this by taking into account the effects of viscosity. To do this we must examine how fluids interact with boundaries and here the concept of zero fluid velocity on a surface (boundary) is important. Once we have an understanding of how real fluid flows behave – and see how difficult it is to analyses turbulent flows –then in Chapters 4 and 5 we shall turn our attention to modelling techniques useful for examining simple fluid flow problems commonly found in engineering. Accordingly, this chapter will look at laminar and turbulent bounded fluid flows. We shall focus on pipe flow as this represents a classic......

Words: 270 - Pages: 2

Free Essay

Fluid Mechanics

...Fundamentals of Fluid Mechanics Fluid mechanics is the study of fluids and the forces on them. (Fluids include liquids, gases, and plasmas.) Fluid mechanics can be divided into fluid kinematics, the study of fluid motion, and fluid dynamics, the study of the effect of forces on fluid motion, which can further be divided into fluid statics, the study of fluids at rest, and fluid kinetics, the study of fluids in motion. Fluid mechanics is very important to engineers when observing flow in pipes, viscous effects of fluids, and the forces that act on a fluid. As a student, I am suppose to demonstrate an adequate understanding of many properties involved fluid mechanics. Some learning outcomes that must be accomplished by taking this class are: * Demonstrate understanding of fluid mechanics fundamentals, fluid and flow properties such as compressibility, viscosity, buoyancy, hydrostatic pressure and forces on surfaces * Apply Bernoulli equation to solve problems in fluid mechanics * Solve fluid mechanics problem using control volume analysis using conservation of mass, energy equation and irreversible flow * Use differential analysis of fluid flow, potential flow theory, viscous flow, Navier Stokes equations to solve problems * Perform modeling and similitude using Buckingham Pi theorem, correlation of experimental data. * Analyze flow in pipes to determine laminar and turbulent flow behaviors. * Apply energy and momentum equations to......

Words: 1681 - Pages: 7

Free Essay

Fluids

...CVEN 3100: Fluid Mechanics Fluid Properties: Review Questions 1. What is the definition of a fluid? A substance that deforms continuously when acted on by a shearing stress of any magnitude. 2. Normal force per unit area in a fluid is called what? Pressure 3. True or False: - Static fluids are not subjected to shear force at any time. T 4. True or False: - Normal forces can occur in a fluid whether it is static or Moving T 5. What is the relation between absolute pressure and gage pressure? Absolute pressure can be found from the gage pressure by adding the value of the atmospheric pressure. 6. What formula is used to calculate density of gases? Identify the parameters in the formula p/RT 7. Define specific weight. What is relation to density? Weight per unit volume. Multiply by gravity 8. Because of viscosity, what happens when a fluid tries to flow? It resists and does not flow quick 9. What is kinematic viscosity? The ratio of absolute viscosity to density 10. State the Newton’s law of viscosity and express it mathematically. Change in velocity over distance which velocity changes. Du/dy 11. What is the purpose of lubricating metal hinges? 12. Why does viscosity of liquids decrease with temperature? Molecules are spread further apart 13. Why does viscosity of gases increase with temperature? Molecular activity increases 14. What is an ideal fluid? A fluid that......

Words: 543 - Pages: 3

Premium Essay

Cfd in Fluid Mechanics

...the earth is roughly 7000˚C. The two reasons why the earth is hot is when the earth was formed, the interior was heated rapidly due to the gravitational forces being converted into heat and radioactive isotopes within the earth liberate heat as they continue to decay. Our ability to drill into the earth is restricted to the upper few kilometers of the earth’s crust. We must look for a location where the earth’s interior heat is brought within our reach. This is most common at plate boundaries. Direct heating systems are designed to supply hot water only with no electricity generation. Borehole drilled to depth of 1800 meters beneath the city of Southampton, UK. Near the bottom of the hole is water at 70˚C. The fluid contains dissolved salts. The fluid is more accurately described as Brine. The Brine is pressurized and so rises unaided to within 100 m of the surface. A turbine pumps the Brine up to the surface through a heat exchanger that transfers heat to clean water. There are four main types of installations, Dry Steam Power Plant, Single Flash Steam Power Plant, Binary Cycle Power Plant, and Double Flash Power Plant....

Words: 343 - Pages: 2